Introduction
The WXM04 wireless microphone is designed for seamless integration with a range of audio equipment, offering a user-friendly experience. This guide provides instructions on usage and troubleshooting to ensure optimal performance.
Setup and Usage
Compatibility and Connection:
Specific Compatibility: The microphone is compatible only with devices that have a MIC input. It is not suitable for AUX input, Bluetooth speakers, or laptops.
Ideal for Various Audio Equipment: Works well with equipment like Yamaha, JBL party box, DYNAUDIO, SONOS, polkaudio, Klipsch, B&W Bowers & Wilkins speakers, singing machines, audio amplifiers, PA systems, voice amplifiers, and more.
Microphone and Receiver Setup:
Microphone Battery: The microphone requires 2 AA batteries (preferably Amazon Alkaline Batteries). Ensure correct installation of batteries according to the + and - directions.
Rechargeable Receiver: Before the first use, charge the receiver for 5 hours. It has a built-in 650 mAh battery, offering 4 hours of working time and gets fully charged in 3 hours.
Powering On: Long press the buttons on both the mic and receiver to turn them on.
Quick Troubleshooting
Power Check: Ensure both the mic and receiver have sufficient power.
Connection Check: Verify that the equipment is connected to the MIC input.
Re-Pairing Procedure:
Turn off both the receiver and mic.
Open the mic battery cap.
Press and hold the mic’s (HI LO) button for over 10 seconds until the display channel flashes.
Quickly turn on the receiver and wait for the mic channel display to stop flashing. The receiver's blue light should remain on, indicating readiness for use.
Using Multiple Wireless Microphones
Re-pair each set separately and switch channel.
Channel Switching: To use multiple WXM04 microphones simultaneously without interference, switch channels by opening the mic battery cover and clicking the “HI LO” button. Ensure each mic is set to a different channel number.
Additional Tips
Volume Adjustment: If the sound output is low, press the key to increase the volume (recommended levels 8-12).
Initial Charge: Upon receiving the product, charge the receiver for 3 hours before first use to ensure proper functionality.
